1. Drawing of the Ecopure? KPR

        Sorptive Processes

        Sorptive processes include absorption and adsorption, both of which are used to remove pollutants from exhaust air.

        If the exhaust air comes into contact with a medium that the pollutant dissolves in more effectively than in the air, the pollutant moves into the medium and the clean air can be discharged from the system. The absorption and adsorption processes differ significantly in the way that they function.


        Adsorption is used only for concentrating the pollutants. After this, the pollutants still have to be removed from the exhaust air by another system.By contrast, absorption removes pollutants from the exhaust air. It is generally used for cleaning flue gases. The two processes are described in more detail below.

        Adsorption process

        The purpose of the adsorption process is to concentrate the pollutants. It is needed when the exhaust air contains a low to medium pollutant concentration. The exhaust air comes into contact with an absorbent and the pollutants are transferred into it because they dissolve more easily in it than in the exhaust air. The pollutants form a physical bond with the absorbent, with the result that they are removed from the air and concentrated in the absorbent. The most widely used absorbents are zeolite materials and activated carbons.

        Downstream exhaust air treatment

        After the pollutants have been concentrated, they can be transferred to a catalytic or thermal oxidation system, where they can be removed. The clean air can then leave the system. This is a more cost-effective and efficient process for purifying exhaust air with a low concentration of pollutants. Condensation and solvent recovery systems can also be used after the adsorption process, which allows the materials to be recycled if required.

        Regeneration of the adsorbent

        After a certain period, the adsorbent has to be regenerated to ensure that it does not become saturated with the pollutants and unable to take in any more material. This process is known as desorption and uses hot air, steam, or an inert gas.
        Two different types of adsorption process are available. The first is fixed bed adsorption, which involves using several adsorbers alternately in adsorption and desorption mode. The second is adsorption with a continuously rotating rotor system, consisting of a specially designed concentration rotor.

        Absorption process

        Absorption also involves one substance taking in or dissolving another substance. The pollutant is generally a gas, while the absorbing medium is usually a liquid, but can also be a solid. Gas scrubbing is a typical application. In this process, unwanted exhaust gas pollutants or by-products of combustion, such as sulfur oxides, halogens and their acids, and chemicals such as ammonia, are removed directly from exhaust gases or exhaust air. The gas scrubbing phase generally follows the oxidation process and sometimes also precedes it.

        Contact Dürr

        Contact Sales Environmental
        Dürr Systems AG
        Carl-Benz-Str. 34
        74321 Bietigheim-Bissingen